Bando 1200XXH300G XXH Timing Belt MOTORSBando 1200XXH300G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong
Model_Number GE70 PRODUCT NAME 7
5 RUNCAPVOLTS 370 SHIPPING WEIGHT 16 BREAKDOWN TORQUE 49
L1408TM SPEC
UL approval UL1077 Trip curve C Number of poles 3 poles Rated current 2 A Maximum voltage 277/480 VAC Type Thermal-magnetic Attributes
Power supply 200-240 V Input phases Three-phase Configuration With options Rated current (ND) 105 A Rated current (HD) 88 A RFI filter Without filter Enclosure IP20 Dynamic braking Standard with braking Safety Stop Prepared to install the accessory CFW500-SFY2 Electronic supply Not Available Attributes
00 % Rated voltage 415 V Rated current 62
Catalog Number IDVSWDM3542 Enclosure TENV Frame 56C Frame Material Stainless Steel Frequency 60
14 LOCKED ROTOR TORQUE UOM OZFT KVA CODE LETTER G LOCKED ROTOR AMPS 50
Load 77° C Start Configuration DOL Break-Down Torque 305 LB-FT Pull-Up Torque 146 LB-FT Locked-Rotor Torque 173 LB-FT Starting Current 273 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
92 % Rated voltage 575 V Rated current 1
657 lb-ft2 Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Frame Prefix D Heater Indicator No Heater Insulation Class F Lifting Lugs No Lifting Lugs Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 14 AWG Mounting Arrangement B35 Overall Length 15
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1725 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Do Not Use Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Manual Thermal Overload Winding Thermal 1 Location KO Winding Thermal 2 None Drawings
