Luvocom® 3F PAHT 9825 NT Filament Diameter:2.85mm

Luvocom® 3F PAHT 9825 NT Filament Diameter:2.85mmLuvocom 3F PAHT 9825 NT Filament is a unreinforced High temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end parts. The

making it suitable for a wider range of applications

Flexural modulus 2

ASA (Acrylonitrile-Styrene-Acrylate) Filament

Drying Instruction: 4 hours

The PEEK Filament produced by 3D4MAKERS meets the European regulations EC No

Increased Impact Resistance compared to regular PETG

ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials

03 (fire behaviour of materials in buses)

Outstanding chemical and thermal resistance

Surface resistivity 10^7 to 10^9 Ohm

Local Exhaust Ventilation at the workplace or on the 3D printer is required

and excellent layer adhesion