.100” 2.54mm Crimp Pins Fits Bally/Stern Data East flipper board

.100” 2.54mm Crimp Pins Fits Bally/Stern Data East flipper board. 100 2. 54mm Crimp Pins Fits Bally Stern. These are the pins you would need to replace when abating battery damage. When the alkaline damage creeps through the traces, and up to the pin headers, it will often continue up into the connectors. These connector pins can often be replaced, even if it's the IDC type Bag of 100 BE4

that corresponding coil locks on

Tie the wire to Ground

Bare Board

All Options

Ideal for board repair when the machine is not present

Data East & Sega - PPB-1 High Voltage Transistor Coil Saver - V1

Bench Testing

Open Source Project: Based on the open-source design from the LISY project (lisy

1 for Zaccaria)

The tester runs four distinct test cycles to thoroughly check all digit combinations and segments

non-obsolete parts

Connect the wire to any convenient Ground for LED indicators