Butler Sink Jig Bolts

Butler Sink Jig BoltsBelfast Butler sink jig will rout recesses into worktops for single or double Belfast sinks. It enables you to accurately rout a drip channel groove on the underside of the worktop and around the outside of the sink recess (5 6mm from the worktop edge) For Worktop Recess use with a 12. 7mm Tungsten Carbon Router Cutter and 30mm Guide Bush For Drip Channel groove use with a 5 or 6mm diameter (3 16" or 1 4") Tungsten Carbide Round Nose Cutter and 16mm

Suitable for high gloss surfaces

seals against water and domestic detergents

ColorFill Applicator

Use on laminate worktops

TopSeal contains no solvents and is Environmentally friendly

It enables you to accurately rout a drip channel groove on the underside of the worktop and around the outside of the sink recess (5-6mm from the worktop edge)

EasiBolt makes the job of tightening bolts under a kitchen work surface much easier

Good heat resistance to 140°C

For Hot Rods use with a 6mm Radius (12mm) Tungsten Carbide Ball nosed cutter and 30mm guide bush

Description:

Specially designed for installation of mitred worktop joints

Cloth is not included