DockHinge Weld-On Hinges & Hitches for Permanent Strength (sold separately) Size:3.75"

DockHinge Weld-On Hinges & Hitches for Permanent Strength (sold separately) Size:3.75"The weld on product comes in a 5" and a 3. 75" backing plate profile for the hitches. The hinge sides are 5" and 2. 5" profiles. It is the same DockHinge but without the carriage bolt holes. This product is used when you want to weld onto a backing plate or aluminium dock. Our Weld On products are sold separately. Hitches are $66. 99 and the Hinges are $59. 99.

8 carriage bolts

- 3/8 inch carriage bolt hole (standard)

The bolt patterns match perfectly with your DockHinge

They are placed on the back side of your materials to add strength to the wood or other materials

but the bolt allows for the hinge to be removed

1" riser or 1 1/2" riser depending on the height adjustment required

4 lock washers and 4 nuts for each half

*Hardware not included: 4 carriage bolts

3/8 inch (hole) for hardware or carriage bolts that are 3/8" (standard)

Weld-on with no holes to weld onto your dock

Example you would need two sets of backing plates for two DockHinge

8 lock washers and 8 nuts for each DockHinge