Haltech - Elite 2000/2500 Ignition Sub-Harness for Nissan RB Twin Cam (External Ignitor) Category_Pistons

Haltech - Elite 2000/2500 Ignition Sub-Harness for Nissan RB Twin Cam (External Ignitor) Category_PistonsThe fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this Plug and Play product allows you to be up and running in just a few hours. An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours. The quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the

Boost Control –Intelligent 4D Closed loop

Nissan 12279-85G00

machined and splined in Australia

The guide is accompanied by the full ECU manual and Software located on a USB key provided with the ECU to refer to while completing your installation and configuration

The PRP Single Crank Keyway is the perfect solution to this problem and is the perfect upgrade item for the Nissan double keyways

so any Reverse Rotation 50-55mm V-Band turbos can be mounted up

Used CAS sensor to suit RB25 (non neo) and RB26 from R32 and R33 GTR

the gear position can be displayed on a digital dash (like the iC-7) giving the driver immediate notification of the gear change and position

Thrust Bearing Retainer Clips

less piston side loading and a stronger ability to deliver HP at higher RPM levels

Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure

- 32 Mbit internal flash