DEEN 3/8 in. Drive T-Handle Combination Socket/Bit Driver DNTE3SET trim panel tool

DEEN 3/8 in. Drive T-Handle Combination Socket/Bit Driver DNTE3SET trim panel toolFine finished 3 8 in. square drive T handle with an internal bit driver on the tip. Quick spin bushing type sleeve with Deen logo. The handle removes for compact storage and turns into a 3 8 in. square drive sliding breaker bar. Super smooth operation with minimal play. The 3 8 in. drive breaker bar T handle fits tightly into the sleeved extension. The bit holder uses a strong magnet to retain most bits. The 3 8 in. drive on breaker bar has a strong

• Unlocks and turns into a bit driving L-handle

In addition

The twist action back-and-forth on the handle rotates the head in one direction on both the back AND forth action of the handle

Adds stabilization and adaptability

• Set comes with: (1/4 in

The bit ratchet side uses a clip to retain most styles of bits

• Spinner size: 30mm x 15mm

Large head width: 29mm

• The bit retaining side is shallow (Approx 6mm deep) and uses a light ring retainer at the mouth of the holder

• For very tough

Yellow socket holders

Torx bits: T15