Alchitry Hd V2

Alchitry Hd V2This board adds two micro HDMI ports to your Alchitry Au or Pt! The Cu does not have the capabilities needed to drive the HDMI ports! Each port is configurable as a source or sink via solder jumpers. The board haves a 5V boost converter and 5V< >3. 3V IO level shifters for the I2C interfaces and hot plug signals on the HDMI ports. It is pin compatible with the Ft, but needs an Sp or other board between the two to fit the USB and micro HDMI cable (for

8V) pins (16 pairs) capable of LVDS_25 IO

25 Gb/s bandwidth per pair

The Io features a bunch of inputs and outputs to pair nicely with some of our tutorials to get you started working with FPGAs

Check out the all new Alchitry Pt

Simplified 3D Model (STEP)

These boards have been reworked so they are fully functioning

112 on the top Routed as differential pairs

2 on QWIIC connector

The only practical difference between this and the production model is that the pinout is different

assuming you aren't using 2

This is your chance to snag a killer deal on a Pt from the first batch if you're willing to deal with some of its quirks

It is pin compatible with the Ft