Treated sawn Reg C24 Timber 75mm x 225mm Length:4.8m / 4800mm / 16ft

Treated sawn Reg C24 Timber 75mm x 225mm Length:4.8m / 4800mm / 16ftTreated sawn C24 timber 75mm x 225mm is a strength graded structural section suitable for demanding load bearing applications including floor joists, rafters, and ridge boards. Kiln dried to 20% moisture content or less, stress graded to BS 4978, and regularised for consistent sizing throughout. Specifications Property Detail Material Softwood (regularised sawn) Treatment Preservative treated Grade C24, stress graded to BS 4978 Finish Regularised

Lining door openings in new build residential properties where a pre-finished oak finish is specified to save on site decoration time

with next-day delivery available to the Bridgend area

"name": "Can P5 chipboard flooring be used in a loft conversion

A door lining is the full frame that surrounds the door opening and is fixed to the wall

window reveals

these sleepers are built for outdoor use and offer solid durability at a lower cost than oak

It is not rated for external use or direct water contact

and decorative detailing on walls

Its depth gives the span capacity needed for most domestic floor layouts

"name":"Do I need felt adhesive as well as clout nails

a structural engineer or span table will typically specify C24 where C16 does not meet the required performance

and no secondary fixing brackets are needed in most applications