Bando P56-14M-40 HT QD Timing Belt Pulley (E) 68mm Wide

Bando P56-14M-40 HT QD Timing Belt Pulley (E) 68mm WideBando P56 14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

34K019-2100G1 HP

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3424L Mounting Arrangement F1 Number of Poles 2 Overall Length 11

Bando - 1000-S14M-1120 C-X

35X050G073G1 HP 2/1

4 No load current 28

00 IN Power Factor 67 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

25 LB-FT Locked-Rotor Torque 4

ECI8A7P0 U1 240 I1 12

Bando - 8D540 To resolve problem applications where belts are flipping over or jumping out of the sheaves

Bando - TL2525 2 1/4 TL® bushings are preferred where mounting space is at a premium

7A HD Amps 60s 20

68 A Rated torque 89