2" x 1/4" x 48" Foam Sealing Tape Kit (JK, JL) Parts

2" x 1/4" x 48" Foam Sealing Tape Kit (JK, JL) PartsThis tape is used between the J30 and the body of the camper (JL and JK) For a factory install, the tape is stuck to the J30. That is because the camper is suspended before mounting so it's easy to put it on! For campers installed without a hoist, the tape can be stuck to the Jeep tub. When used on the tub, it's nice to first put a layer of blue low stick masking tape on the metal, then apply the foam to the masking tape. This makes it much easier to

or cover needs to be cleaned or replaced

the 1st Generation J30  does not have these notches

These are used parts from Elements that were converted to ECampers

Switching (+) and (-) will stop light from working

rocker panel trim and front bumper trim

• Stretch band

Set of 4 Yakima Towers compatible with the Landing Pad mounts installed by Ursa Minor

that is absolutely the only ones we have (and are probably from finding them in some random box in the store room)

150 lb 50% stronger replacement gas springs

• Jersey-lined hood

Application:

this antenna may be damaged or discarded with the old windshield during the service